6
According to the guidance displayed on the screen, start the measurement.
The following screen appears on the TV when the measurement finishes.
1
a
Warning message (if available)
7
Select “Save” to apply the measurement results to the speaker settings.
8
Disconnect the YPAO microphone from the unit.
This completes optimization of the speaker settings.
NOTICE
(
The YPAO microphone is sensitive to heat, so should not be placed anywhere it could be exposed to direct sunlight or high
temperatures (such as on top of AV equipment).
NOTE
(
An error message may appear during the measurement.
(
“YPAO Volume” in the “Option” menu is automatically enabled after the YPAO measurement. Then, the high- and low-frequency
levels are automatically adjusted according to the volume so that you can enjoy natural sounds even at low volume.
(
If the speaker settings you have configured manually are not suitable, discard the manual settings and reload the previous YPAO
adjustments.
(
To cancel the operation, disconnect the YPAO microphone before starting the measurement.
(
YPAO multi measurement option cannot be enabled with wireless speakers.
Related links
(
“Setting the speaker impedance” (p.238)
(
“Assigning speaker configuration” (p.118)
(
“Configuring the speaker settings automatically based on the YPAO measurement results” (p.121)
(
“Error messages from YPAO” (p.129)
(
“Warning messages from YPAO” (p.130)
(
“Adjusting the high- and low-frequency levels automatically according to the volume” (p.194)
(
“Reloading the previous YPAO adjustments” (p.240)
117
PREPARATIONS > Configuring the speaker settings