En
66
Warning messages
If a warning message is displayed after the measurement, you can still save the measurement
results by following on-screen instructions.
However, we recommend you perform YPAO again in order to use the unit with the optimal
speaker settings.
Warning message
Remedy
WARNING 1
A speaker cable may be
connected with the reverse
polarity (+/-).
Select “Wiring” in “Measurement result” (p.64) and check the cable
connections (+/-) of the speaker identified by “Reverse”.
If the speaker is connected incorrectly:
Turn off the unit and then reconnect the speaker cable.
If the speaker is connected correctly:
Depending on the type of speakers or room environment, this message
may appear even if the speakers are connected correctly. In this case,
you can ignore the message.
WARNING 2
A speaker is placed more than
24 m (80 ft) from the listening
position.
Select “Distance” in “Measurement result” (p.64) and move the speaker
identified by “>24.00m (>80.0ft)” within 24 m (80 ft) of the listening
position.
WARNING 3
There are significant volume
differences between the
speakers.
Select “Level” in “Measurement result” (p.64) and check the speaker
identified by “Over ±10.0dB”, then check the usage environment and
cable connections (+/-) of each speaker, and the volume of the
subwoofer. We recommend using the same speakers or speakers with
specifications that are as similar as possible.
