Recording your Performance
24
•
N1
Owner’s Manual
3
Start recording.
Recording starts as soon as you play the keyboard.
Alternatively, press the [PLAY/STOP] button to start recording.
The [RECORD] button indicator and the [PLAY/STOP] button indicator light
up.
4
Stop recording.
Press either the [RECORD] or [PLAY/STOP] button to
stop recording.
Data writing will begin.
When the recording is finished, the “
End
” appears on the
display for three seconds.
NOTICE
Do not turn off the power to the instrument or disconnect the USB flash memory device,
while the instrument is recording the data (while “- - -“ is displayed ). Otherwise, all
recorded data, including the data being recorded, will be lost.
5
Play back the recorded performance.
Press the [PLAY/STOP] button to start playback of the recorded performance.
Playing Back the Song Recorded to the Instrument
You can play back the song recorded to the instrument using the Record function (page 23). You can also play the
keyboard along with the playback.
Refer to page 27 to playback the song recorded to a USB flash memory device.
1
Engage User Song mode.
While holding down the [DEMO/SONG] button, press the
[+] or [-] button until “
USr
” appears on the display.
2
Start playback.
Press the [PLAY/STOP] button to start playback.
3
Stop playback.
Press the [PLAY/STOP] button again to stop playback.
If the metronome was on when you started
recording, you’ll be able to keep time with
the metronome while recording, but the
metronome sound will not be recorded.
If the memory becomes full during record-
ing, “
FUL
” will appear on the display and
recording will stop automatically. (All
recorded data up to that point will be
retained.)
If you wish to erase previously recorded
data to the instrument, press the [PLAY/
STOP] button to start recording, then press
it again to stop recording. Do not connect
any USB device during this operation.
The song data recorded to a USB flash
memory device can be erased by using a
computer.
When you record to a USB flash memory
device directly, if you select another song or
disconnect the USB device after recording,
the recorded performance cannot be played
back by pressing the [PLAY/STOP] button.
Refer to “Listening to songs in USB Flash
Memory” on page 27 to play back the song.
End
2, 3
1
User song:
In this manual, the performance data
recorded to this instrument is called a “User
song”.
Usr
