Yamaha Arius YDP-164, Руководство пользователя

Страница: 35 / 48

Keyboard Stand Assembly
35
YDP-164, YDP-144, YDP-S54 Owner’s Manual
2-4
Insert the other two tapping screws (4 x 20
mm) into the other two screw holes to
secure B.
2-5
Securely tighten the screws on the top of B
that were attached in Step 2-2.
3.
Secure C.
3-1
Securely tighten the screws on C that were
attached in Step 1-3.
3-2
Attach the caps to the head of the screws.
4.
Mount A.
Be sure to place your hands at least 10 cm from
either end of A when positioning it.
CAUTION
• Fingers can become pinched between the main unit and the
rear or side panels, be extra careful so as not to drop the
main unit.
• Do not hold the keyboard in any position other than the
position shown in the illustration.
5.
Secure A.
5-1
Adjust the position of A so that the left and
right ends of A will project beyond D and E
equally when seen from the front.
5-2
Secure A by tightening the short screws (6 x
16 mm) from the front.
2-3
2-3
2-4
2-2, 2-5
2-1
Place the
b ottom ends
of the rear
panel on
each foot.
3-1
3-2
3-2
D
E
B
A
At least
10 cm
At least
10 cm
A
5-1
5-2
A
Projection of A