Maintenance
118
*1: Whichever comes first.
*2: Check every 200 hours.
Perform the pre-operation checks and post-operation checks before performing periodic main-
tenance.
Shift cable
Check connections and exterior,
and lubricate (shift gate end)
√
Exhaust hose, water
lock, and resonator
Check for exhaust leakage, and
check clamps at connections
√
Drain passages
Remove clogs
√
Drain plugs
Check O-rings
√
√
Hull and deck
Check for damage
√
√
Windshield and seats
Check installation and operation,
and check for damage
√
√
Wakeboard tower
(AR195/AR190)
Check installation, and check for
damage
√
√
Hatches, hinges, and
packing seals
Check installation
√
√
Ladder
Check installation
√
√
Access port cap
Check exterior and installation
√
Spark plugs
Check
√
√
High-pressure fuel
hose
Check connections and exterior,
and check for leakage
√
Engine oil
Replace
√
√
√
Engine oil filter
Replace
√
Air filter element
Check for damage and dirt
√
Intake hose and
breather hose
Check for damage, and check con-
nections
√
Throttle body
Lubricate throttle valve
√
Anodes (engine)
Check for corrosion
√
*2
Valve clearance
Check and adjust
√
*2
Rubber coupling
Check for looseness and noise
√
Engine mount
Check for damage and peeling
√
Cooling water hose
and cooling water pi-
lot outlet hose
Check for damage, and check con-
nections
√
Water inlet strainer
Check for damage
√
√
Intake grate
Check for damage
√
√
Impeller
Check for bends, damage, and for-
eign material
√
√
Impeller duct
Check and lubricate
√
Jet thrust nozzle
Check movement, and lubricate
√
Intermediate housing
Lubricate
√
Anode (jet pump unit)
Check for corrosion
√
Item
Operation
Initial
Thereafter every
10
hours
50
hours
or 12
months
*1
100
hours
or 12
months
*1
200
hours
or 24
months
*1
SportsBoat_F4B10.book Page 118 Thursday, June 2, 2016 10:08 AM
Downloaded from
