Pre-operation checks
92
1
Engine shut-off switch
2
Clip
Cooling water pilot outlet check
Check that water comes out from the pilot out-
let while the engine is running in the water. If
water is not circulating, something may be
clogging the intake grate. Refer to “Jet pump
clean-out procedure” on page 124.
AR195/SX195
AR190/SX190
TIP:
●
The number of cooling water pilot outlets
varies according to the model.
AR195/SX195: 3 cooling water pilot outlets
AR190/SX190: 1 cooling water pilot outlet
●
It may take up to 20 seconds for water to
reach the pilot outlet when first launching
the boat. The amount and force of the exit-
ing water will vary with engine speed.
NOTICE
A continuous flow of water from the pilot
outlet shows that water is flowing through
the engine cooling water passages. If wa-
ter is not flowing out of the pilot outlet dur-
ing operation, do not continue to run the
engine. Overheating and serious damage
could occur. (See “Engine overheat warn-
ing system” on page 46 for more informa-
tion.)
Fuel level check
Select the fuel level display of the multi-func-
tion tachometer. (See page 39 for information
on selecting the fuel level display.)
1
Fuel level
Add fuel if necessary. (See page 75 for infor-
mation on filling the fuel tank.)
2
1
E
F
1
SportsBoat_F4B10.book Page 92 Thursday, June 2, 2016 10:08 AM
Downloaded from
