Yamaha Apex RX10PA Скачать руководство пользователя страница 88 | Manualshive

Страница: 88 / 106

background image

Troubleshooting

82

WARNING

EWS00570

●

Connect the jumper cables only to the
connecting lead terminals. Do not con-
nect them to the frame or any wire or
other lead.

●

When connecting the jumper cables, do
not contact the jumper cables or con-
necting lead terminals to each other or
to the frame or any metal part of the
snowmobile. This can cause electrical
system damage or A FIRE HAZARD.

●

Be sure to pull the lead covers back over
the terminals completely. If the termi-
nals are exposed, they could come into
contact with the frame or a metal part of
the snowmobile and this can cause elec-
trical system damage or A FIRE HAZ-
ARD.

NOTICE

ECS00650

Use the connecting leads to jump-start the
snowmobile only. Do not use the connect-
ing leads for any other purpose.

To start the engine using the booster battery
1.

Apply the parking brake and turn the
main switch to the off position.

2.

Remove the shroud and the right side
cover. (See page 49 for removal proce-
dures.)

3.

Remove the red (+) connecting lead from
the lead holder and move it away from
the black (–) connecting lead.

NOTICE:

Be sure to connect the red (+) jumper
cable to the red (+) connecting lead
and the black (–) jumper cable to the
black (–) connecting lead. Do not re-
verse the connections.

[ECS00661]

4.

Pull the red (+) connecting lead cover to
expose the terminal through the slit in the
cover, and then connect the red (+) jump-
er cable to the red (+) connecting lead.

U8HG10E0.book Page 82 Tuesday, May 18, 2010 5:39 PM

«
...
86
87
88
89
90
...
»

Содержание Apex RX10PA











































































































Отзывы:

Нет отзывов

Похожие инструкции для Apex RX10PA

2005 Ranger 4x4

Бренд: Polaris Страницы: 121

Бренд: Cushman Страницы: 71

Бренд: Baja motorsports Страницы: 82

Бренд: Yerf-Dog Страницы: 59

Бренд: Suzuki Страницы: 111

Raider-Classic 150

Бренд: Dazon Страницы: 79

Бренд: Dinli Страницы: 122

Бренд: FamilyFun Страницы: 13

Бренд: Stels Страницы: 139

QUAD WILD HP 300 RV - 2005

Бренд: GAS GAS Страницы: 72

Бренд: Sauber Страницы: 11

Quadard SQ series

Бренд: Shengqibao Страницы: 9

Бренд: Precision Страницы: 9

12 Volt Quad Bike

Бренд: Duck Dynasty Страницы: 10

Trackster 898002

Бренд: Cushman Страницы: 23

Бренд: Cushman Страницы: 68

Бренд: Cushman Страницы: 124

Бренд: Cushman Страницы: 263

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды