Yamaha AL125 Скачать руководство пользователя страница 69

Страница: 69 / 84

PERIODIC MAINTENANCE AND ADJUSTMENT

7-33

3. Remove the headlight bulb cover

by pulling it off.

4. Remove the headlight bulb sock-

et by pushing it inward and turn-
ing it counterclockwise, and then
remove the burnt-out bulb.

5. Place a new bulb into position,

and then secure it with the bulb
socket.

ECAU0070

NOTICE

If a headlight bulb of different watt-
age than recommended is used, it
may cause the battery to discharge
or affect the headlight lighting.

6. Install the panel and cowling.
7. Have a Yamaha dealer adjust the

headlight beam if necessary.

Front turn signal light bulb

1. Place the motorcycle on the cen-

terstand.

2. Remove panel A and cowling A.

(See page 7-7, 7-6.)

3. Remove the socket (together with

the bulb) by turning it counter-
clockwise.

4. Remove the burnt-out bulb by

pulling it out.

5. Insert a new bulb into the socket

by pushing it in until it stops.

ECAU0080

NOTICE

If a turn signal light bulb of different
wattage than recommended is
used, the turn signal light flashing
may be affected.

6. Install the socket (together with

the bulb) by turning it clockwise.

7. Install the panel and cowling.

1. Headlight bulb cover (x 2)

1. Headlight bulb (x 2)

ZAUU0651

ZAUU0652

1. Front turn signal light bulb socket

ZAUU0653

33SF8199E0.book Page 33 Friday, December 11, 2009 1:56 PM

Содержание AL125





















































































Результаты поиска

Содержание AL125

Отзывы:

Yamaha AL125, Руководство пользователя, Страница: 69 / 84

Результаты поиска

Содержание AL125

Отзывы: