CONTROLS AND FUNCTIONS
6
En
1
Infrared signal transmitter
Sends infrared signals.
2
A
AMP
Turns this unit on, or sets it to standby mode.
3
OPEN/CLOSE
Opens/closes the disc tray of the Yamaha CD player.
Refer to the owner’s manual of your CD player for
details.
Even when using a Yamaha CD player, certain components
and features may not be available.
4
A
CD
Turns the Yamaha CD player on, or sets it to standby
mode. Refer to the owner’s manual of your CD player
for details.
Even when using a Yamaha CD player, certain components
and features may not be available.
5
CD DIRECT AMP
Reproduces CD sound in the highest signal quality
(see page 12).
6
Input selector buttons
Selects the input source you want to listen to.
y
The input source names correspond to the names of the
connection jacks on the rear panel.
7
/–
Increases or decreases the sound output level.
8
MUTE
Reduces the current volume level by approximately
20 dB. Press again to restore the audio output to the
previous volume level. Pressing the /–
also cancels muting.
The input indicator on the front panel for the current
input source blinks while the output is muted.
9
PURE DIRECT
Reproduces any input source in the purest sound
possible (see page 12).
Remote control
Note
Note
