background image

i

 En

IMPORTANT SAFETY INSTRUCTIONS

1

Read these instructions.

2

Keep these instructions.

3

Heed all warnings.

4

Follow all instructions.

5

Do not use this apparatus near water.

6

Clean only with dry cloth.

7

Do not block any ventilation openings. Install in 
accordance with the manufacturer’s instructions.

8

Do not install near any heat sources such as radiators, 
heat registers, stoves, or other apparatus (including 
amplifiers) that produce heat.

9

Do not defeat the safety purpose of the polarized or 
grounding-type plug. A polarized plug has two blades 
with one wider than the other. A grounding type plug 
has two blades and a third grounding prong. The wide 
blade or the third prong are provided for your safety. If 
the provided plug does not fit into your outlet, consult 
an electrician for replacement of the obsolete outlet.

10

Protect the power cord from being walked on or 
pinched particularly at plugs, convenience receptacles, 
and the point where they exit from the apparatus.

11

Only use attachments/accessories specified by the 
manufacturer.

12

Use only with the cart, stand,  
tripod, bracket, or table 
specified by the manufacturer, 
or sold with the apparatus. 
When a cart is used, use 
caution when moving the cart/
apparatus combination to 
avoid injury from tip-over.

13

Unplug this apparatus during lightning storms or when 
unused for long periods of time.

14

Refer all servicing to qualified service personnel. 
Servicing is required when the apparatus has been 
damaged in any way, such as power-supply cord or 
plug is damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus has been 
exposed to rain or moisture, does not operate normally, 
or has been dropped.

IMPORTANT

Please record the serial number of this system in the
space below.

Model:

Serial No.:

The serial number is located on the rear of the main
unit.
Retain this Owner’s Manual in a safe place for future
reference.

 

 

 

WARNING

The lightning flash with arrowhead symbol, 
within an equilateral triangle, is intended to 
alert you to the presence of uninsulated 
"dangerous voltage" within the product's 
enclosure that may be of sufficient 
magnitude to constitute a risk of electric 
shock to persons.

The exclamation point within an equilateral 
triangle is intended to alert you to the 
presence of important operating and 
maintenance (servicing) instructions in the 
literature accompanying the appliance.

Explanation of Graphical Symbols

TO REDUCE THE RISK OF FIRE OR ELECTRIC 
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO 
RAIN OR MOISTURE.

• Be sure to allow spaces of at least 20 cm above, 

behind and on both sides of the unit.

• Do not place the following objects on the unit:

A vessel with water in it.
If the vessel falls by vibrations and water spills, it 
may cause damage to the unit, and/or you may get an 
electric shock.

Содержание 900SW

























Отзывы: