–16–
INTRODUCTION/PERIODIC MAINTENANCE/
LUBRICATION INTERVALS
CHK
ADJ
NOTE:
EB300000
PERIODIC INSPECTIONS AND ADJUSTMENTS
INTRODUCTION
This chapter includes all information necessary to perform recommended inspections and adjust-
ments. These preventive maintenance procedures, if followed, will ensure more reliable vehicle opera-
tion and a longer service life. The need for costly overhaul work will be greatly reduced. This informa-
tion applies to vehicles already in service as well as to new vehicles that are being prepared for sale. All
service technicians should be familiar with this entire chapter.
EB301000
PERIODIC MAINTENANCE/LUBRICATION INTERVALS
The annual checks must be performed every year, except if a kilometer-based maintenance is
performed instead.
From 50,000 km, repeat the maintenance intervals starting from 10,000 km.
Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools,
data and technical skills.
NO
ITEM
CHECK OR MAINTENANCE JOB
ODOMETER READING (
1,000 km)
ANNUAL
NO.
ITEM
CHECK OR MAINTENANCE JOB
1
10
20
30
40
CHECK
1
*
Fuel line
Check fuel hoses for cracks or damage.
√
√
√
√
√
2
*
Fuel filter
Check condition.
√
√
Check condition.
√
√
3
Spark plugs
Clean and regap.
√
√
Replace.
√
√
4
*
Valves
Check valve clearance.
Adjust
√
√
√
√
5
Air filter element
Clean.
√
√
5
Air filter element
Replace.
√
√
6
Clutch
Check operation.
Adjust.
√
√
√
√
√
7
*
Front brake
Check operation, fluid level and vehicle for fluid
leakage. (See NOTE)
√
√
√
√
√
√
Replace brake pads.
Whenever worn to the limit
8
*
Rear brake
Check operation, fluid level and vehicle for fluid
leakage. (See NOTE)
√
√
√
√
√
√
Replace brake pads.
Whenever worn to the limit
9
*
Brake hose
Check for cracks or damage.
√
√
√
√
√
9
*
Brake hose
Replace. (See NOTE)
Every 4 years
10
*
Wheels
Check runout, spoke tightness and for damage.
Tighten spokes if necessary.
√
√
√
√
11
*
Tires
Check tread depth and for damage.
Replace if necessary.
Check air pressure.
Correct if necessary.
√
√
√
√
12
*
Wheel bearings
Check bearing for looseness or damage.
√
√
√
√
13
*
Steering bearings
Check bearing play and steering for roughness.
√
√
√
√
√
13
*
Steering bearings
Lubricate with lithium-soap-based grease.
Every 20,000 km
14
*
Chassis fasteners
Make sure that all nuts, bolts and screws are
properly tightened.
√
√
√
√
√
15
Sidestand
Check operation.
Lubricate.
√
√
√
√
√
16
*
Sidestand switch
Check operation.
√
√
√
√
√
√
