CARE & MAINTENANCE
BUYING PARTS
Washing and Care
• DO NOT leave the Seascooter in the water. Always take the unit out of water when not in use.
• Always rinse the Seascooter with fresh water and allow it to dry before storage.
• Whenever possible rinse the Seascooter with fresh water immediately after use.
• To clean the Seascooter do not use detergents; only use a damp cloth to wipe the unit clean.
• The battery housing interior should be kept dry at all times.
• If the battery housing interior gets wet, see page 14, “Flooding Events” for procedure.
Additional battery pods, chargers or
Li
series accessories can be purchased separately. Please contact your Local Customer Service Center /
Distributor, or visit www.seascooter.net to purchase them.
Using the Optional Extended Life Battery for 350Li and 220Li
An optional extended life battery is available through your Local Customer Service Center / Distributor (or visit www.seascooter.net).
The battery fits into the Battery housing in the same position as the Normal battery, and can be charged the same way as the standard battery.
500Li battery
Optional Extended Life Battery Running Time (Normal Use)
350Li battery
220Li battery
90 minutes
500Li
NA
NA
120 minutes
350Li
75 minutes
NA
160 minutes
220Li
100 minutes
60 minutes
CAUTION:
The Seascooter 350Li and 220Li will assume slight negative buoyancy when using
the extended life 500Li Battery, because this battery is heavier than the standard
batteries included with the 350Li and 220Li Seascooter. When upgrading your 350Li
or 220Li with an 500Li battery pack always insert EPS floats inside the Nose cone as
illustrated for adding extra buoyancy. Never use the 350Li or 220Li with 500Li
battery pack without adding the EPS Floats because the units will have less
buoyancy and may sink. EPS floats can be purchased separately.
A
B
C
B
A
C
Check the marking on the EPS floats and insert them into the
Nose Cone as shown above. Always use 3M double-sided tape
to fix the EPS Floats inside the Nose Cone. Never use glue.
12
