Yamaha 25A Скачать руководство пользователя | Manualshive

Страница: 122 / 131

background image

EMU01599

IMPORTANT WARRANTY INFORMATION FOR U.S.A. AND

CANADA

Welcome to the Yamaha Family!

Congratulations on the purchase of your new Yamaha marine power. Yamaha is commit-
ted to exceptional customer satisfaction, and we want your ownership experience to be
a satisfying one. Please read the following warranty information to help ensure satisfac-
tion with your Yamaha.

Yamaha is ready to stand behind your purchase with strong warranty coverage. To be sure
you receive all the benefits of warranty, please take the following steps:

1. Be sure your new Yamaha is registered for warranty. Your boat dealer should do this at

the time of sale. Make sure your dealer gives you a copy of the completed Yamaha regis-
tration card for your records. If you are unsure whether or not your Yamaha is registered,
complete the Warranty Registration card found inside the cover of the Owner's Manual.
Mail it to the distributor for the country in which you live (see step 6 for the correct
address). If your Yamaha is not properly registered, a warranty repair could be unneces-
sarily delayed while registration records are checked.

2. Read the Limited Warranty statement which follows these instructions. This warranty

applies to Yamaha outboard motors sold in the United States, whether purchased sepa-
rately or when supplied as original equipment by a boat builder. The terms also apply to
original equipment packages sold in Canada, with coverage provided by Yamaha Motor
Canada (see ``Warranty Guide'' for Canadian models). This warranty explains the condi-
tions of the warranty, including the obligations that your dealer and you as the owner
have under the warranty. For example, your Yamaha outboard must receive a proper
pre-delivery inspection (PDI) by the selling dealer. Failure to take this important step
could jeopardize warranty coverage!

3. If you need warranty repairs, you must take your Yamaha outboard to an authorized

Yamaha outboard dealer. Be aware that not all selling boat dealers are authorized Yama-
ha dealers. Only authorized dealers have the factory training, special tools, and Yamaha
support needed to perform warranty repairs.

4. If you are away from home, or your selling dealer is not an authorized Yamaha dealer,

use the following toll-free numbers to find the nearest Yamaha dealer.

United States Dealer Locations: 1-800-692-6242
Canada Dealer Locations:

1-800-267-8577

6L2-9-1H 6 4/20/01 1:48 PM Page 4

«
...
120
121
122
123
124
...
»

Содержание 25A




































































































































Отзывы:

Нет отзывов

Похожие инструкции для 25A

Бренд: Aaeon Страницы: 122

Бренд: Aaeon Страницы: 52

Бренд: Aaeon Страницы: 99

IP-M945A SERIES

Бренд: WEALTHTEC Страницы: 72

Бренд: IEI Technology Страницы: 126

Бренд: Xilinx Страницы: 40

Бренд: Avalue Technology Страницы: 89

Бренд: National Semiconductor Страницы: 22

Бренд: Texas Instruments Страницы: 18

Бренд: ASROCK Страницы: 2

Бренд: NXP Semiconductors Страницы: 14

DS-5116HFI Series

Бренд: HIKVISION Страницы: 22

Cypress MB39C502-EVBSK-01

Бренд: Infineon Technologies Страницы: 28

Бренд: Xilinx Страницы: 31

Бренд: Intel Страницы: 12

Бренд: National Semiconductor Страницы: 22

Бренд: Lite-on Tech Страницы: 49

X58 Classified3

Бренд: EVGA Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды