Yamaha 242 Limited S, Руководство пользователя

Страница: 75 / 135

O
peratiOn
3
3-15
4) Unclip the plastic clips and pull the
rear supports toward the stern. Ex-
tend the rear supports to the long
position (bottom button).
4
Spring-loaded pin
5
Long position (attaching)
6
Middle position (cruising)
7
Short position (pulling wakeboard)
5) Attach the rear support poles to
the mount brackets with the spring-
loaded pins.
6) Collapse the rear poles to either the
middle-button position for cruising
or to the top-button position if you
are using the wakeboard tower to
tow a wakeboarder or skier. Be sure
the snap buttons click into place.
NOTICE:
Do not exceed 45 mph (72 km/h) with
the Bimini top in the up position.
Storing
1) Extend the forward support poles by
pressing in the snap buttons.
2) Remove the spring-loaded pins.
Push the forward support poles
back and clip the plastic supports
into place on the other support
poles.
3) Unzip the flaps holding the top to
the rearmost tower tube.
4) Roll the fabric around the frame. Put
on the storage cover and zip it into
place.
5) Secure the top to the tower using
the straps provided.
Trailering with the Bimini Top
The top must be in the lowered position,
covered, and strapped to the tower or
removed from the tower entirely before
attempting to trailer the boat.
Removing the Bimini Top
1) Follow the steps for storing.
2) Remove the lock pins holding the
Bimini top to the mounting brackets.
3) The top can now be removed from
your boat.
When reinstalling the Bimini top,
simply reverse the removal steps
making sure the lock pins are fully
engaged.
See page 4-4 for Bimini top care infor-
mation.
4
5
6
7