manualshive.com logo in svg

Yamaha 2011 XVS1300AA, Руководство пользователя

Поделиться
Скачать
Yamaha 2011 XVS1300AA Скачать руководство пользователя страница 36

INSTRUMENT AND CONTROL FUNCTIONS

4-19

4

With the engine turned off:
1. Move the sidestand down.
2. Make sure that the engine stop switch is set to “
3. Turn the key on. 
4. Shift the transmission into the neutral position.
5. Push the start switch.

Does the engine start?

With the engine still running:
6. Move the sidestand up.
7. Keep the clutch lever pulled.
8. Shift the transmission into gear.
9. Move the sidestand down.

Does the engine stall?

After the engine has stalled:
10. Move the sidestand up.
11. Keep the clutch lever pulled.
12. Push the start switch.

Does the engine start?

The system is OK. 

The motorcycle can be ridden.

The neutral switch may not be working correctly.

The motorcycle should not be ridden

 until

checked by a Yamaha dealer.

The sidestand switch may not be working correctly.

The motorcycle should not be ridden

 until

checked by a Yamaha dealer.

The clutch switch may not be working correctly.

The motorcycle should not be ridden

 until

checked by a Yamaha dealer.

YES

NO

YES

NO

YES

NO

If a malfunction is noted, have a Yamaha
dealer check the system before riding.

WARNING

”.

U12C24E0.book  Page 19  Wednesday, November 17, 2010  9:01 AM

Содержание 2011 XVS1300AA





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды