Yamaha 2011 WaveRunner SuperJet Скачать руководство пользователя страница 56 | Manualshive

Страница: 56 / 76

Yamaha 2011 WaveRunner SuperJet Скачать руководство пользователя страница 56

Care and storage

51

closed space, make sure that it is well ven-
tilated. Always shield your eyes when
working near batteries.
Keep out of the reach of children.

To remove the battery:
(1) Disconnect the negative (–) battery lead.
(2) Disconnect the positive (+) battery lead.
(3) Disconnect the breather hose.
(4) Unhook the battery bands, and then re-

move the battery from the watercraft.

Checking the battery

●

Make sure that the battery case is not dam-
aged.

●

Make sure that the battery terminals are not
corroded or damaged.

●

Make sure that the breather hose is not
clogged or damaged.

Checking the electrolyte level

Make sure that the electrolyte level is be-
tween the maximum and minimum level
marks.
If the electrolyte level is low, add distilled wa-
ter to raise it to the specified level.

NOTICE:

Use only distilled water for replenishing

the battery, otherwise battery life could be
shortened.

[ECJ00241]

If distilled water was added, check the battery
voltage.
It is recommended to have a Yamaha dealer
check the battery voltage and charge the bat-
tery. If you charge the battery yourself, be
sure to read and follow the instructions provid-
ed with the battery tester and charger you
use.

NOTICE:

Do not attempt to charge a

battery hastily. Battery life could be short-
ened.

[ECJ00251]

Checking the battery bands

Make sure that the battery bands are not
damaged.

To store the battery:
(1) Clean the battery case using fresh water.

1

Positive (+) battery terminal: Red lead

2

Battery band

3

Negative (–) battery terminal: Black lead

4

Breather hose

1

Maximum level mark

2

Minimum level mark

1

Battery band

UF2F50E0.book Page 51 Friday, April 2, 2010 5:00 PM

«
...
54
55
56
57
58
...
»

Содержание 2011 WaveRunner SuperJet













































































Отзывы:

Нет отзывов