Yamaha 2010 XVS1100AZ Скачать руководство пользователя

Страница: 55 / 96

PERIODIC MAINTENANCE AND ADJUSTMENT

7-8

3. Remove the spark plug as shown,

with the spark plug wrench includ-
ed in the owner’s tool kit.

To check the spark plugs

1. Check that the porcelain insulator

around the center electrode on
each spark plug is a medium-to-
light tan (the ideal color when the
vehicle is ridden normally).

2. Check that all spark plugs installed

in the engine have the same color.

TIP

If any spark plug shows a distinctly dif-
ferent color, the engine could be oper-
ating improperly. Do not attempt to

diagnose such problems yourself. In-
stead, have a Yamaha dealer check
the vehicle.

3. Check each spark plug for elec-

trode erosion and excessive car-
bon or other deposits, and replace
it if necessary.

4. Measure the spark plug gap with a

wire thickness gauge and, if nec-
essary, adjust the gap to specifica-
tion.

To install a spark plug

1. Clean the surface of the spark plug

gasket and its mating surface, and
then wipe off any grime from the
spark plug threads.

2. Install the spark plug with the

spark plug wrench, and then tight-
en it to the specified torque.

TIP

If a torque wrench is not available when
installing a spark plug, a good estimate
of the correct torque is 1/4–1/2 turn
past finger tight. However, the spark
plug should be tightened to the speci-
fied torque as soon as possible.

3. Install the spark plug cap.
4. Place the spark plug cover in the

original position.

1. Spark plug wrench

Specified spark plug:

NGK/BPR7ES
DENSO/W22EPR-U

1. Spark plug gap

Spark plug gap:

0.7–0.8 mm (0.028–0.031 in)

Tightening torque:

Spark plug:

20 Nm (2.0 m·kgf, 14 ft·lbf)

U3B824E0.book Page 8 Thursday, June 18, 2009 8:34 AM

Содержание 2010 XVS1100AZ

































































































Результаты поиска

Содержание 2010 XVS1100AZ

Отзывы:

Похожие инструкции для 2010 XVS1100AZ

Бренды по названию

Популярные бренды

Yamaha 2010 XVS1100AZ, Руководство пользователя

Результаты поиска

Содержание 2010 XVS1100AZ

Отзывы:

Похожие инструкции для 2010 XVS1100AZ

Бренды по названию

Популярные бренды