manualshive.com logo in svg

Yamaha 2009 XP500Y TMAX, Руководство по обслуживанию

Поделиться
Скачать
Yamaha 2009 XP500Y TMAX Скачать руководство пользователя страница 14

FEATURES

1-5

Odometer and tripmeter modes

Pushing the “SELECT” button switches the dis-
play between the odometer mode and the trip-
meter modes in the following order:
Odo 

→

 Trip-A 

→

 Trip-B 

→

 OIL Trip 

→

 V-BELT 

Trip 

→

 Odo

When approximately 3.0 L (0.79 US gal) (0.66 
Imp.gal) of fuel remains in the fuel tank, the dis-
play will automatically change to the fuel reserve 
tripmeter mode “F Trip” and start counting the 
distance traveled from that point. In that case, 
pushing the “SELECT” button switches the dis-
play between the various tripmeter and odome-
ter modes in the following order:
Odo 

→

 F Trip 

→

 Trip-A 

→

 Trip-B 

→

 OIL

Trip 

→

 V-BELT Trip 

→

 Odo

To reset a tripmeter, select it by pushing the “SE-
LECT” button until “F Trip”, “Trip-A” or “Trip-B” is 
displayed. While “F Trip”, “Trip-A” or “Trip-B” is 
displayed, push the “RESET” button for at least 
one second. If you do not reset the fuel reserve 
tripmeter manually, it will reset itself automatical-
ly and the display will return to the prior mode af-
ter refueling and traveling 5 km (3 mi).

TIP

The display cannot be changed back to “F Trip” 
after pushing the “RESET” button.

Oil change indicator “OIL”

This indicator flashes at the initial 1000 km (600 
mi), then at 5000 km (3125 mi) and every 5000 
km (3125 mi) thereafter to indicate that the en-
gine oil should be changed.
After changing the engine oil, reset the oil 
change indicator. To reset the oil change indica-
tor, select it by pushing the “SELECT” button un-
til “OIL Trip” is displayed, and then push the 
“RESET” button at least 1 second. When push-
ing the “RESET” button, “OIL Trip” starts flash-
ing. While “OIL Trip” is flashing, push the 
“RESET” button for at least 3 seconds.
If the engine oil is changed before the oil change 
indicator “OIL” flashes (i.e. before the periodic oil 
change interval has been reached), the indicator 

1. Odometer/tripmeters

1. Oil change tripmeter

1. V-belt replacement tripmeter

1

1

1

1. Fuel reserve tripmeter

1. Oil change indicator “OIL”

1

1

Содержание 2009 XP500Y TMAX



































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды