manualshive.com logo in svg

Yamaha 2008 XV1900AX, Руководство пользователя

Поделиться
Скачать
Yamaha 2008 XV1900AX Скачать руководство пользователя страница 24

INSTRUMENT AND CONTROL FUNCTIONS

3-8

3

If any of the immobilizer system circuits
are defective, the immobilizer system
indicator light will flash, and then the
display will indicate a two-digit error
code.

NOTE:

If the display indicates error code 52,
this could be caused by transponder in-
terference. If this error code appears,
try the following.

1. Use the code re-registering key to

start the engine.

NOTE:

Make sure there are no other immobi-
lizer keys close to the main switch, and
do not keep more than one immobilizer
key on the same key ring! Immobilizer
system keys may cause signal interfer-
ence, which may prevent the engine
from starting.

2. If the engine starts, turn it off and

try starting the engine with the
standard keys.

3. If one or both of the standard keys

do not start the engine, take the
vehicle, the code re-registering

key and both standard keys to a
Yamaha dealer and have the stan-
dard keys re-registered.

If the odometer/tripmeter/clock display
indicates any error codes, note the
code number, and then have a Yamaha
dealer check the vehicle.

CAUTION:

ECA11590

If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.

Brightness control mode

The brightness can be adjusted for the
following:

●

the multi-function meter unit panel
(item number “1”)

●

the LCD (item number “2”)

●

the speedometer, tachometer, and
the fuel gauge needles (item num-
ber “3”)

Select the brightness control mode as
follows.

1. Turn the key to “OFF”.
2. Push and hold the “SELECT”

switch.

1. Multi-function meter unit panel
2. LCD

3. Speedometer needle

4. Tachometer needle
5. Fuel gauge needle

U5C522E0.book  Page 8  Wednesday, October 17, 2007  11:38 AM

Содержание 2008 XV1900AX

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды