manualshive.com logo in svg

Yamaha 2008 SuperJet, Руководство пользователя

Поделиться
Скачать
Yamaha 2008 SuperJet Скачать руководство пользователя страница 76

Trouble recovery

71

EJU34620

Emergency procedures 

EJU34630

Cleaning the jet intake and impeller 

If weeds or debris get caught in the jet intake
or impeller, cavitation can occur, causing jet
thrust to decrease even though engine speed
rises. If this condition is allowed to continue,
the engine will overheat and may seize. If
there is any sign that the jet intake or impeller
is clogged with weeds or debris, return to
shore and check the intake and impeller. Al-
ways stop the engine before beaching the wa-
tercraft.

WARNING

EWJ00780

Before attempting to remove weeds or de-
bris from the jet intake or impeller area,
shut the engine off and remove the clip
from the engine shut-off switch. Severe in-
jury or death could result from coming in

contact with the rotating parts of the jet
pump.

CAUTION:

ECJ00650

If weeds or debris get caught in the jet in-
take, do not operate the watercraft above
trolling speed until they have been re-
moved.

(1) Turn the watercraft on its side as shown.

UF2F10E0.book  Page 71  Tuesday, July 31, 2007  1:45 PM

Содержание 2008 SuperJet























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды