Yamaha 2006 GRIZZLY 125 Скачать руководство пользователя страница 88

Страница: 88 / 153

7-36

RIDING OVER ROUGH TERRAIN

Riding over rough terrain should be done with

caution. Look out for obstacles which could

cause damage to the ATV or could lead to an

upset or accident. Be sure to keep your feet

firmly mounted on the footboards at all times.

Avoid jumping the ATV as loss of control and

damage to the ATV may result.

POTENTIAL HAZARD

Improperly operating over obstacles.

WHAT CAN HAPPEN

Could cause loss of control or a collision.

Could cause the ATV to overturn.

HOW TO AVOID THE HAZARD

Before operating in a new area, check for

obstacles.

Never attempt to ride over large obstacles,

such as large rocks or fallen trees. When

you go over obstacles, always follow

proper procedures as described in the

Owner’s Manual.

WARNING

1C5-9-12-2 3/2/05 7:03 PM Page 7-36

Содержание 2006 GRIZZLY 125


























































































































































Результаты поиска

Содержание 2006 GRIZZLY 125

Отзывы:

Yamaha 2006 GRIZZLY 125, Руководство пользователя, Страница: 88 / 153

Результаты поиска

Содержание 2006 GRIZZLY 125

Отзывы: