PERIODIC MAINTENANCE AND MINOR REPAIR
6-34
6
4. Remove the brake pedal free play
adjusting nut, and then disconnect
the brake rod from the brake cam-
shaft lever.
5. Remove panel A. (See page 6-5.)
6. Remove the bolts that secure the
final gear case to the swingarm.
7. Lift the rear wheel off the ground
according to the procedure on
page 6-31.
8. While supporting the drive shaft,
pull the rear wheel back to remove
the following parts as an assem-
bly: wheel, wheel axle, final gear
case, and drive shaft.
NOTE:
Make sure to support the drive shaft as
it is being pulled out.
EAU25511
To install the rear wheel
1. Install the rear wheel, wheel axle,
final gear case, and drive shaft by
pushing the wheel forward and
guiding the drive shaft into the mid-
dle gear universal joint.
2. Install the final gear case bolts.
3. Install the brake rod onto the brake
camshaft lever, and then install the
brake pedal free play adjusting nut
onto the brake rod.
4. Install the brake torque rod bolt
and nut at the brake shoe plate.
5. Install the panel.
6. Lower the rear wheel so that it is
on the ground.
1. Brake pedal free play adjusting nut
2. Brake camshaft lever
3. Bolt and nut (shoe plate)
4. Brake torque rod
5. Bolt and nut (swingarm)
6. Brake rod
1. Bolt
2. Final gear case
1. Middle gear universal joint
2. Drive shaft
U5SC21E0.book Page 34 Wednesday, May 19, 2004 11:41 AM
Содержание 2005 V Star XVS650T
Страница 2: ...U5SC21E0 book Page 2 Wednesday May 19 2004 11 41 AM ...
Страница 13: ...SAFETY INFORMATION 1 6 1 3 XVS650 3 XVS650A U5SC21E0 book Page 6 Wednesday May 19 2004 11 41 AM ...
Страница 88: ...A5 yoko_Blank fm Page 1 Tuesday April 8 2003 11 43 AM ...
Страница 89: ...A5 yoko_Blank fm Page 1 Tuesday April 8 2003 11 43 AM ...