Yamaha 2005 SuperJet 700 страница 17 Скачать руководство пользователя | Manualshive

Страница: 17 / 114

background image

1-10

E

●

Helmets meeting Snell or DOT standards
are required for IJSBA-sanctioned races.
You must decide whether to wear a hel-
met while you ride for recreation. You
should know that a helmet could help pro-
tect you in certain kinds of accidents and
that it could injure you in others.
A helmet is designed to provide some
head protection. Although helmets cannot
protect against all foreseeable impacts, a
helmet might reduce your injuries in a col-
lision with a boat or other obstacle.
A helmet may have potential safety haz-
ards, as well. Falling into the water could
risk the chance of the helmet catching
water, commonly known as “bucketing,”
and the resulting strain on your neck
could cause choking, severe and perma-
nent neck injuries, or death. A helmet
could also increase the risk of an accident
if it reduces your vision or hearing, or if it
distracts you or increases your fatigue.
How should you decide if a helmet’s
potential safety benefits outweigh its
potential risks for you? Consider your par-
ticular riding conditions. Consider factors
such as your riding environment and your
riding style and ability. Also consider the
likelihood of traffic congestion, and the
water surface conditions. If you decide to
wear a helmet based upon your riding cir-
cumstances, choose one carefully. Look
for a helmet designed for personal water-
craft use, if possible. Consider a helmet
meeting Snell or DOT standards. If you
will be engaging in closed-course compe-
tition, follow the helmet requirements of
the sanctioning organization.

●

NEVER operate the watercraft after con-
suming alcohol or taking other drugs.

●

For reasons of safety and proper care of
the watercraft, always perform the pre-
operation checks listed on page 3-5
before operating the watercraft.

●

The operator should always keep both
feet or knees on the riding tray when the
watercraft is in motion. Lifting your feet
increases your chances of losing your
balance, and your feet being hit by objects
outside the watercraft.

●

Always consult your doctor on whether it
is safe for you to operate this watercraft if
you are pregnant or in poor health.

●

Do not attempt to modify this watercraft!
Modifications to your watercraft may
reduce safety and reliability, and render
the watercraft unsafe or illegal for use.

UF1N13.book Page 10 Monday, May 31, 2004 9:02 AM

«
...
15
16
17
18
19
...
»

Содержание 2005 SuperJet 700



















































































































Отзывы:

Нет отзывов

Похожие инструкции для 2005 SuperJet 700

Бренд: Sevylor Страницы: 64

Бренд: J/Boats Страницы: 65

Бренд: Moomba Страницы: 72

Бренд: BRIG Страницы: 44

260 Canyon Runner

Бренд: Glacier bay Страницы: 50

Бренд: Canoe Cove Страницы: 29

GTX 4-TEC 5573 2002

Бренд: Sea-doo Страницы: 505

Бренд: Grady-White Boats Страницы: 66

Бренд: Grady-White Boats Страницы: 76

Бренд: Grady-White Boats Страницы: 78

Бренд: Grady-White Boats Страницы: 74

Бренд: Grady-White Boats Страницы: 76

Бренд: Grady-White Boats Страницы: 87

Бренд: Mercury Страницы: 122

Бренд: Mercury Страницы: 144

Nautica 450 RACE

Бренд: Nautica Boats Страницы: 20

Бренд: KAYAKS2FISH Страницы: 17

FX High Output WaveRunner 2004

Бренд: Yamaha Страницы: 144

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды