Yamaha 2004 WaveRunner FX Cruiser Скачать руководство пользователя | Manualshive

Страница: 132 / 136

background image

6-3

E

EJU19862

YAMAHA EXTENDED SERVICE (Y.E.S.)

Keep your Yamaha protected even after your warranty expires with genuine Yamaha Extended
Service (Y.E.S.).

●

●

●

●

Y.E.S. is designed and administered by Yamaha Motor Corporation to provide maximum owner
satisfaction. You get uninterrupted factory-backed coverage for extra peace of mind.

●

●

●

●

Y.E.S. is flexible. You choose the plan that is right for you: 12 months, 24 months, 36 months, or
(on four-stroke models) 48 months beyond your warranty period.

●

●

●

●

Y.E.S. is designed and administered by the same Yamaha people who handle your warranty



and it shows in the comprehensive coverage benefits. There are no mileage limitations. Cover-
age is not limited to “moving parts” or the “drive train” like many other plans. And Y.E.S. covers
manufacturing defects just like the warranty. See the sample contract at your Yamaha dealer to
see how comforting uninterrupted factory-backed protection can be.

●

●

●

●

You do not have to pay anything for covered repairs. There is no deductible to pay, and repairs
are not “pro-rated.” You do not have any “out-of-pocket” expenses for covered repairs.

●

●

●

●

In addition, Travel and Recreation Interruption Protection (TRIP) is included at no extra cost.
TRIP gives you up to $150 reimbursement per occurrence for any reasonable expenses you
incur because your Yamaha needs covered service: replacement vehicle rental, emergency
towing, phone calls, even food and lodging when you are away from home. This superb cover-
age goes into effect when you purchase Y.E.S., so it applies to any warranty repairs as well as
covered repairs during your entire Y.E.S. plan period.

●

●

●

●

Y.E.S. coverage is honored at any authorized Yamaha dealer nationwide.

●

●

●

●

Y.E.S. coverage is transferable to a new owner if you sell or trade-in. That can make your
Yamaha much more valuable!

This excellent Y.E.S. plan coverage is only available to Yamaha owners like you, and only while
your Yamaha is still within the Yamaha Limited Warranty period. So visit your authorized Yamaha
dealer to get all the facts. He can show you how easy it is to protect your investment with Yamaha
Extended Service.
We urge you to act now. You will get the excellent benefits of TRIP coverage right away, and you
will rest easy knowing you will have strong factory-backed protection even after your Yamaha
Limited Warranty expires.

A special note:
If visiting your dealer is not convenient, contact Yamaha with your Primary ID number (your Owner’s
Manual shows you where to find this number). We will be happy to help you get the Y.E.S. coverage
you need.

Yamaha Service Marketing
P.O. Box 6555
Cypress, CA 90630
1-(866)-YES-EXTD
(1-866-937-3983)

UF1B12.book Page 3 Monday, July 7, 2003 1:48 PM

«
...
130
131
132
133
134
...
»

Содержание 2004 WaveRunner FX Cruiser









































































































































Отзывы:

Нет отзывов

Похожие инструкции для 2004 WaveRunner FX Cruiser

Бренд: J/Boats Страницы: 65

Бренд: LaserPerformance Страницы: 15

CAP CAMARAT 7.5 CC serie 2

Бренд: Jeanneau Страницы: 112

FLEXIBLE FURLER 2

Бренд: CDI Страницы: 18

Бренд: Fountaine Pajot Страницы: 86

42 Side Console

Бренд: YAMARIN Страницы: 38

Бренд: Ranger boats Страницы: 78

Бренд: Johnson Outdoors Страницы: 28

Бренд: Williams Страницы: 57

Бренд: Sabre Страницы: 81

Бренд: Gumotex Страницы: 40

SUN ODYSSEY 49 DS

Бренд: Jeanneau Страницы: 126

2-IN-1 SLIDE & BOUNCE COMBO PARK

Бренд: Banzai Страницы: 8

Бренд: Vega Страницы: 27

Бренд: PATHFINDER Страницы: 29

SUPERJET 700 2005

Бренд: Yamaha Страницы: 114

Бренд: Gumotex Страницы: 52

Бренд: Meridian Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды