PERIODIC MAINTENANCE AND MINOR REPAIR
6-11
6
3. Remove the engine oil filler cap
and drain bolt to drain the oil from
the crankcase.
NOTE:
_
Skip steps 4–6 if the oil filter element is
not being replaced.
_
4. Remove the oil filter element cover
by removing the bolts.
5. Remove and replace the oil filter
element and O-ring.
6. Install the oil filter element cover
by installing the bolts, then tighten-
ing them to the specified torque.
NOTE:
_
Make sure that the O-ring is properly
seated.
_
1. Engine oil drain bolt
2. Oil pan
1. Bolt (
×
3)
1. Oil filter element
2. O-ring
Tightening torque:
Oil filter element cover bolt:
10 Nm (1.0 m·kg)
E_5kr.book Page 11 Wednesday, October 4, 2000 6:02 PM