Yamaha 1999 XVS1100, Руководство по обслуживанию

Страница: 141 / 355

4-36
TIMING GEARS
ENG
NOTE:
NOTE:
10 Nm (1.0 m kg)
NOTE:
EAS00292
CHECKING THE PRIMARY DRIVE
1. Check:
primary drive gear
primary driven gear
Damage / wear
Replace the primary drive
and primary driven gears as a set.
Excessive noise during operation
Re-
place the primary drive and primary driven
gears as a set.
2. Check:
primary-drive-gear-to-primary-driven-gear
free play
Free play exists
Replace the primary drive
and primary driven gears as a set.
INSTALLING THE TIMING DRIVE GEARS
1. Install:
timing chain
(onto the timing chain drive gear sprocket)
To prevent the timing chain from falling into the
crankcase, fasten it with a wire.
2. Install:
timing chain drive gear sprocket
timing chain drive gear shaft
Make sure that the “2” mark on the timing chain
drive gear sprocket is installed in the rear cylin-
der and the “3” mark on the timing chain drive
gear sprocket is installed in the front cylinder.
3. Install:
stopper plate 1
stopper plate bolt
Turn the timing chain drive gear shaft so that the
stopper plate fits correctly into the slot and then
fasten the stopper plate with the bolt.