manualshive.com logo in svg

Yamaha 01V96i, Справочное руководство

Yamaha 01V96i - многоканальный цифровой микшер с мощными функциями. Получите доступ к руководству пользователя и быстрому старту бесплатно, загрузив их с manualshive.com. Узнайте больше о возможностях этого устройства и начните использовать его с помощью доступного руководства.

Поделиться
Скачать
background image

88

Remote Control

01V96i—Reference Manual

DAW REW

Fast rewinds the cursor position.

DAW SHUTTLE

Switches the Wheel mode to Shuttle.

DAW SCRUB

Switches the Wheel mode to Scrub 
(Jog).

DAW AUDITION

You can audition the pre-roll, 
post-roll, in-point area, or out-point 
area by holding down the button to 
which this function is assigned and 
pressing a button to which DAW 
PRE, DAW POST, DAW IN, or DAW 
OUT is assigned.

DAW PRE

Plays back from the pre-roll point up 
to the beginning of the selected 
area.

DAW IN

Plays back from the beginning of the 
selected area for a duration specified 
as the pre-roll.

DAW OUT

Plays back to the end of the selected 
area for a duration specified as the 
post-roll.

DAW POST

Plays back from the end of the 
selected area for a duration specified 
as the post-roll.

DAW RTZ

Moves the playback cursor to the 
beginning of the session.

DAW END

Moves the playback cursor to the 
end of the session.

DAW ONLINE

Toggles between on-line and off-line.

DAW LOOP

Toggles Loop Playback on and off.

DAW 
QUICKPUNCH

Toggles QuickPunch on and off.

DAW AUTO FADER

Correspond to the Automation Over-
write (Auto Enable) functions.

DAW AUTO MUTE

DAW AUTO PAN

DAW AUTO SEND

DAW AUTO 
PLUGIN

DAW AUTO 
SENDMUTE

DAW AUTO READ

Select Automation modes.

DAW AUTO 
TOUCH

DAW AUTO LATCH

DAW AUTO WRITE

DAW AUTO TRIM

DAW AUTO OFF

DAW AUTO 
SUSPEND

Cancels Automation recording and 
playback for all channels. When 
Automation is interrupted, the LED 
flashes, and channel strip controls 
maintain the current settings.

DAW AUTO 
STATUS

Displays the channel Automation 
mode (Read, Tch, Ltch, Wrt, or Off). 
The mode setting appears at the bot-
tom of each channel on a Channel or 
Meter Display page when you press 
and hold the button to which this 
function is assigned.

Parameter

Function

DAW GROUP 
STATUS

Displays a Group ID (to which each 
channel belongs) below each chan-
nel number on a Channel or Meter 
Display page (in all caps for a main 
group and in lowercase letters for a 
sub-group).

DAW MONI 
STATUS

Pressing the key (to which this func-
tion is assigned) enables you to view 
the current monitoring mode and 
the channel strip type.

DAW CREATE 
GROUP

Pressing the key (to which this func-
tion is assigned) enables you to exe-
cute the function specified in the 
menu of the Pro Tools Group list.

DAW SUSPEND 
GROUP

Suspends all mix groups temporarily. 
Press the button again to undo sus-
pension.

DAW WIN 
TRANSPORT

Shows or hides the Transport win-
dow.

DAW WIN INSERT

Shows or hides the Insert window.

DAW WIN 
MIX/EDIT

Toggles between the Mix window 
and Edit window. (Both windows are 
not displayed at the same time.)

DAW WIN 
MEM-LOC

Shows or hides the Memory Loca-
tions window.

DAW WIN STATUS

Shows or hides the Status window.

DAW UNDO

Executes the Edit menu’s Undo/Redo 
command.

DAW SAVE

Executes the Edit menu’s Save com-
mand.

DAW EDIT MODE

Pressing the button (to which this 
function is assigned) repeatedly 
selects Shuffle, Slip, Spot, or Grid 
edit mode in this order.

DAW EDIT TOOL

Pressing the button (to which this 
function is assigned) repeatedly 
selects one of seven edit tools 
(Zoomer, Trimmer, Selector, Grab-
ber, Smart Tool, Scrubber, and Pen-
cil, in this order).

DAW SHIFT/ADD

Functions in the same way as Macin-
tosh keyboard keys (Shift, Option, 
Control, and Alt). Pressing one of the 
buttons (to which these functions 
are assigned) along with another 
button enables you to execute vari-
ous commands.

DAW OPTION/ALL

DAW 
CTRL/CLUCH

DAW ALT/FINE

DAW BANK +

Executes the Bank Swap operation. 
Pressing the button (to which this 
function is assigned) switches the 
entire 16-channel bank.

DAW BANK –

DAW C

Executes the Channel Scroll opera-
tion. Pressing the buttons (to which 
these functions are assigned) enables 
you to scroll channels horizontally.

DAW Channel –

Parameter

Function

Содержание 01V96i



























































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 01V96i

BakeMark HS10 Installation, Operation And Care Manual preview
HS10
Бренд: BakeMark Страницы: 5
Rane AM1 Operator'S Manual preview
AM1
Бренд: Rane Страницы: 8
Rane AM1 Datasheet preview
AM1
Бренд: Rane Страницы: 4
Omcan BL-GR-0450A Instruction Manual preview
BL-GR-0450A
Бренд: Omcan Страницы: 16
TELELYNX IDH2-3000 Series Manual preview
IDH2-3000 Series
Бренд: TELELYNX Страницы: 59
Behringer X AIR XR12 Quick Start Manual preview
X AIR XR12
Бренд: Behringer Страницы: 76
G-Lab MIDI Guitar Controller User Manual preview
MIDI Guitar Controller
Бренд: G-Lab Страницы: 24
ROMIX HM 55 User Manual preview
HM 55
Бренд: ROMIX Страницы: 39
Mission VM-PRO Configuration Manual preview
VM-PRO
Бренд: Mission Страницы: 2
Reloop innoFADER Install Instructions preview
innoFADER
Бренд: Reloop Страницы: 2
Onerr Copper Tremolo CT-1 User Manual preview
Copper Tremolo CT-1
Бренд: Onerr Страницы: 11
I TUTTOFARE ROBOT 3 IN 1 Instruction Manual preview
ROBOT 3 IN 1
Бренд: I TUTTOFARE Страницы: 12
Tefi Vintage Lab MACCHERONI BROS Operating Manual preview
MACCHERONI BROS
Бренд: Tefi Vintage Lab Страницы: 2
Sloan EFX-8 SERIES Repair Parts And Maintenance Manual preview
EFX-8 SERIES
Бренд: Sloan Страницы: 6
Farberware SPECIAL SELECT FSM126BKM Use And Care Instructions Manual preview
SPECIAL SELECT FSM126BKM
Бренд: Farberware Страницы: 32
Windmere togo MXB-5 Use And Care Book preview
togo MXB-5
Бренд: Windmere Страницы: 2
Hitachi HMX1 Manual preview
HMX1
Бренд: Hitachi Страницы: 7
Velleman HQ POWER VDSM02 User Manual preview
HQ POWER VDSM02
Бренд: Velleman Страницы: 7

Бренды по названию

Популярные бренды

Загрузить еще бренды