
5
6.
How to use
1) Wipe the base and the opposite oil supply port base with a clean waste cloth.
2) Adjust the base groove to the oil supply port base and set it securely by sliding.
Note that oil leakage may occur if this set status is incomplete.
3) Tighten the check valve. If the check valve is loose, the pressure cannot be increased.
4) Step on the footboard so as not to move the oil tank and operate the handle up/down slowly to
supply oil.
5) After completion of the oil supply, loosen the check valve to bleed the internal pressure of the
pump and hose. Then, remove the base from the oil supply port base.
CAUTION
If the base is removed from the oil supply port base before the check valve is loosened, oil will be
discharged from the pump and hose, thereby contaminating the surroundings.
6) After completion of lubrication for all positions, loosen the check valve to bleed the internal
pressure of the pump and hose, and hang the base on the base hanger without being
contaminated.
CAUTION
- When operating the handle, do not insert the hand into a clearance between the handle and the
handle stopper. An unexpected injury may be caused by nipping.