Pair with remote control
Ensure alarm is UNARMED, open the
battery cover.
Press the “Learn” button and the red
light will flash.
Take the remote control and
open the battery cover.
Press the “Learn” button on the
remote control.
The red light will flash, and the remote
control will send the code. At this time,
you will hear the main alarm beep twice,
indicating that the alarm has
successfully learned the remote
control communication code.
PLEASE NOTE: To allow the main alarm to learn the code of another device, release the learn button to exit the
learning mode. The red light will stop flashing denoting that the operation is complete, and the main alarm will
return to standby status. You can now add another device to the system using the relevant steps.
1
2
3
4
If the red lights keep flashing, the battery
is lowand requires replacing.
PLEASE NOTE:
Replace batteries
if red light is
flashing.
4
