6.6 Lighting Setting
Unlock the safe and the light will be on and it will switch off
automatically after the safe door is closed. If the door is open, the
light will off after 15 seconds.
If you want to switch off the light for eco-friendly reason, please
follow the below steps:
(1) Open the door and press to activate the system. Input the
Passcode (User Passcode / Master Code) and press to confirm
(2) The display will show “SET”, press “3” to enter Administration
Setting Mode and press . When the display shows “L-OFF”, it
means light is off.
You can repeat step 1 - 2 to switch the light on.
*Note: you can switch on/off the light manually under this mode.
6.7 Alarm Setting
(1) The alarm will ring for 1 minute after 3 consecutive wrong
passcode entry / 5 consecutive wrong fingerprint entry. Enter the
correct User Passcode / Master Code / Fingerprint to stop the
alarm.
(2) The alarm will ring for 1 minute if anyone is trying to hit the
safe or move it. Enter the correct User Passcode / Master Code /
Fingerprint to stop the alarm.
(3) Reminder to close the safe: if the user leaves the safe door
open for more than 5 minutes, the alarm will ring for 10 seconds
to remind the user.
Note: When the safe door is open, situation (1) & (2) will not happen.
Built-in light
Press “*” and then press
