Set Up Button
Press the set up button
(redbutton inside the
battery box).
The system will make a “Beep”
sound and the display “FINGER”
will be shown.
Place your finger on sensor
until you hear another “Beep” to
confirm your success registration.
*Note: The display “FULL” will be shown and follow with a long “Beep” sound
when 100 fingerprints are registered. User has to remove some records before
registering new fingerprint.
The display “AGAIN”means recording the same fingerprint
for second time.Put the same finger on sensor.If it is successful,
you will hear 2 “Beep” sound and the display “dONE” will be
shown before it resumes to resting mode. If the registration fails,
it will display “E-CODE” and a long “Beep”sound to alert you
before it returns to resting mode.
Repeat step if more fingerprints need to be regisyered.
3.5 Reset Master Code
The default master code is
88888888.
*Note: It is important for user to re-program the User Passcode and Master
Code for a new safe as soon as it is in place.
In resting mode, press for 3 seconds until the display
“NEU” is shown.
Input the default master code and press to confirm.
Input the new master code(8digits)and press to confirm.
When you see “AGAIN” on display, input the new master code
again. The display “dONE” will be shown after new master code
is saved successfully. The display “E-CODE” will be shown if it is
not successful before it returns to resting mode.
*Note: If you have forgotten your passcode, use the master code to open the
safe and re-set your user passcode. Please keep your code safe.
