Yale Sync Alarm Скачать руководство пользователя страница 3

How do I arm and disarm the alarm from the Yale Home app? 

 

You can arm and disarm the alarm using a keypad, key fob, or using the controls in the app. In the 
app tap on the My Yale page, tap on the house icon to open the alarm controls. 

 
 
What happens if the Internet goes down? 

 

The alarm will remain in the state it was before the Internet went down. The communication 
between your hub and devices is on a wireless frequency that does not rely on an internet 
connection, so the system will continue to operate as normal, however you would need to arm or 
disarm your system via a physical accessory such as a keypad or key fob until the internet connection 
is re-established.  
 
Please note that without an internet connection to your Hub, you will not be able to operate the 
alarm via the App. 

 
 
What are geo-notifications?

 

 

When you enable geo-notifications the app will send you a notification when you leave home 
without arming the alarm or when you arrive home and the alarm is armed. 

 
 
How do I delete a sensor?

 

 

In the Yale Home app go to Settings->Alarm Settings->Devices. Then slide right to left on the sensor 
to delete. Finally tap on the Trash icon to delete the sensor. 

 
 
Why does my hub Chime/Ping when the door/window opens

The Panel Chime setting in the sensor settings (Settings->Alarm Settings->Devices) turns on a chime 
that is played whenever the sensor detects the door/window opening. 

 
 
How do I turn of the Chime/Ping Noise?

 

 

You can disable the Panel Chime in the sensor settings, in Settings->Alarm Settings->Devices. 
 
 

Can I use my voice assistant to check the status of my sensors? 

Yes, you can use Amazon Alexa and Google Assistant. The voice commands are: 
 

Alexa 

'Alexa, arm my security panel.' 
'Alexa, arm my security panel in away mode.' 
'Alexa, arm my security panel in home mode.' 
'Alexa, is my security panel armed?' 
'Alexa, is back door open?' 
'Alexa, is front door locked?' 
'Alexa, turn on desk lamp.' 
 

Google Assistant 

'Ok Google, set the security panel to fully arm.' 
'Ok Google, set the security panel to part arm.' 
'Ok Google, is the security panel armed?' 

Содержание Sync Alarm

Страница 1: ...erts What do the LED lights mean on my Smart Hub 1 Network LED Green LED ON Connected to Yale Home server LED OFF Disconnected from Yale Home server 2 Fault Status LED Amber LED ON System Fault Check the App History Log to know more about the fault reported LED Flash AC failure Check the Smart Hub is correctly connected to the main power LED OFF System normal 3 Panel Mode LED Red LED ON System in ...

Страница 2: ...ht gap to allow air to circulate What do I do if the window sensor calibration gets stuck or fails If the calibration fails or gets stuck you can cancel the process and restart it by going to Settings Alarm Settings Devices and tapping on the window sensor You can then tap on the button to restart the calibration process What can I use to press the learn button on the window sensor You can a firm ...

Страница 3: ...ut arming the alarm or when you arrive home and the alarm is armed How do I delete a sensor In the Yale Home app go to Settings Alarm Settings Devices Then slide right to left on the sensor to delete Finally tap on the Trash icon to delete the sensor Why does my hub Chime Ping when the door window opens The Panel Chime setting in the sensor settings Settings Alarm Settings Devices turns on a chime...

Страница 4: ...oogle lock the front door Ok Google is the front door locked Ok Google is the front door closed Ok Google is the front window closed Ok Google turn off the Kitchen lights Ok Google are the Kitchen lights on ...

Отзывы: