SCP400/SCP4400 Series
Security Door Closer
Installation Instructions
80-9344-0621-010 (06-09)
Note:
For Special Applications a separate door and frame preparation template is packed with these instructions.
Use this instruction sheet for installation sequence and closer adjustments only.
For Hold Open function, consult factory or authorized representative
For closers with or without
suffix (Delayed Action) closing feature.
“DL”
An incorrectly installed or improperly
adjusted door closer can cause
property damage or personal injury.
These instructions should be followed
to avoid the possibility of
misapplication or misadjustment.
CAUTION
CAUTION
Parallel Non Hold Open Arm
Product Type
Series
* SCP400 Series are sized door closers wi h 50% power increase capability.
Power size 2 weakest power, power size 6 strongest.
** SCP4400 Series can be adjusted from power size 1 thru 6.
t
Push Side Installation
Closer mounts on opposite to hinge (push) side of door.
Right Hand Door – RH
Left Hand Reverse – LHR
Hinge Edge
of Door
Left Hand Door – LH
Right Hand Reverse – RHR
• Security Door Closers only. Door closer cover is handed and cannot be reversed. All other components are non handed.
• It is recommended that the door, on which the door closer will be installed, be hung on ball bearing hinges. Door must swing freely.
• A separate door stop, supplied by others, is recommended to prevent damage to the door closer, closer arm, or to the door, frame or
adjacent walls.
• Door and Frame must be properly reinforced, or use of special fasteners employed, to prevent the mounting screws from pulling out.
• All dimensions are given in inches with corresponding metric dimensions (mm) in parenthesis.
• Torx tamper resistant drive screws are normally supplied with this product.
Sized*
Closer
Multi-Sized **
Closer
SCP400
SCP4400
Security Door Closer
(Door Closer with both a Security Cover and Security Arm)
488 Drop Plate is available for doors with narrow top rails.
Hinge Edge
of Door
