12
An ASSA ABLOY Group brand
P/N AYRD220-INST-FUL Rev C
Factory Default Settings
To reset the lock to factory default, see the following:
The following procedure returns the lock to its factory defaults
by deleting all user codes
(including the Master PIN code*)
and
returning all programming features to their original default settings
(see below).
1. Remove the batteries and then remove the interior escutcheon
to access the reset button.
2. The reset button (see image at right) is located above the
PCB cable connector.
3. Hold down the reset button (for a minimum of 3 seconds) and
then reinstall the batteries; once the batteries are properly
installed, release the reset button.
All features, including adjustable settings** (see below) should
now be returned to factory default.
Upon reset, Master Code Registration is the only option available
and
must be performed
prior to any other programming of the lock.
See
"Operation"
in this manual for programming instructions.
Reset Lock to Factory Default
**Adjustable only when using Network Module
*The Master PIN code must be registered prior to any other programming of the lock.
Cable
Reset
Button
Inside Escutcheon
Settings
Factory Default
Master PIN Code
Registration
required*
Automatic Re-lock
Disabled
Inside Indicator Light
Disabled (Off)
One Touch Locking
Enabled
Audio/Volume
Enabled (Low)
Privacy Mode
Disabled
Automatic Re-lock Time
**30 Seconds
Wrong Code Entry Limit
**5 Times
Shutdown Time
**60 Seconds
