Yale real living Z-Wave Plus YRD420-F-ZW3, Руководство по установке

Страница: 57 / 63

23
Battery is fully
charged
0x80 0x05
After a low battery alert was
observed, the lock was powered down
and powered back up with full battery.
0x08 0x0D
Handing Cycle
completed
0x81
0x00 Right-handed install 0x06 0xFE
0x01 Left-handed install 0x06 0xFE
Door Lock needs Time
set / RF Module Power
Cycled 0x82 0x00
Power to the lock was restored and
the locks RTC was cleared. The
controller should set the time to
ensure proper logging.
0x08 0x01
Disabled user entered
at keypad
0x83
0x (01-max
users) A disabled user pin code was entered
at the keypad
0x06 0xFE
Valid user but outside
of schedule
0x84
0x (01-max
users)
A valid user can be both a normal user
and a non-Access user. If a non-
access user is out of schedule this
alarm will be sent instead of the non-
access alarm.
0x06 0xFE
Fingerprint Unlock 0x91 0x(01- Max
Fingerprint
Slot)
User credentials unlock (credential
type: 0x02). Alarm Level represents
Fingerprint Slot number.
0x06 0X06
Fingerprint Lock 0x92 0x(01- Max
Fingerprint
Slot)
User credentials lock (credential type:
0x02). Alarm Level represents
Fingerprint Slot number. 0x06 0X05
Tamper Alarm 0xA1
0x01
keypad attempts exceed code entry
limit
0x06 0X10
0x02 front escutcheon removed from main 0x06 0xFE
Low Battery Alarms ³
0xA7
0x (Current
%)
Low Battery
Starting at 4.6V
0x08 0x0A
0xA8
0x (Current
%)
Critical Battery Level Starting at 4.4V 0x08 0x0B
Integrated BLE Lock ⁴ 0xE2 0x00 Integrated BLE Lock 0x06 0x03
0x01 Integrated BLE Auto Relock 0x06 0x09
Integrated BLE Unlock
⁴
0xE3 0x00 Integrated BLE Unlock 0x06 0X04
0x01 Integrated BLE Auto Unlock 0x06 0X04