9
Required Tools:
⚫
Phillips Screwdriver
⚫
1/8" Drill Bit
See pages 8 for overlay panel dimensions before installing.
For easy overlay installation, refrigerator door removal is required.
1. Open the drawer and detach the front drawer panel by removing ten
Phillips screws. (See image 1). Save all these screws for later
reinstallation.
2. Remove drawer gasket and handle.
3. Lay stainless steel panel face-down on a safe solid surface and detach
the front drawer panel by removing fourteen Phillips screws. (See
image 2). Save all these screws for later reinstallation.
4. Place the new overlay panel under the drawer body and fix it with
clamps to ensure that the two remain aligned and do not move. The
clamp ensures the overlay panel and drawer stay aligned with each
other while installing. Once panel is clamped in place, pilot holes may
be drilled into the panel from the rear side of the drawer (See image 3).
5. Secure overlay panel to drawer panel using appropriate size screws.
6. Reattach drawer gasket by pressing and snapping back into place in
gasket channel.
7.
Reattach drawer panel front to the drawer using ten screws.
8.
Reattach handle front to the drawer using appropriate size screws.
1
2
3
