_____________________________________________________________________
1) Press Panic A then PIN number, Panic A and 2 –
siren beeps
2) Press Panic A then 4 –
siren beeps
3) The new Key Pad press Panic A then 0000, Panic A and 1 –
siren beeps
4) Press DISARM twice on both the Key pads
Changing PIN number on the Key Pad:
1) Press Panic A the PIN (0000 in case of new pad), Then press Panic B +
new 4 digit
PIN and press ARM to confirm. (this should be a continuous process)
2) Press DISARM twice to exit the programming mode
Resetting PIN number on the Key Pad Back to 0000:
1) Take the battery out from the Key Pad, Press and Hold 3 and insert the
battery back in whilst still holding 3 – the PIN number should be RESET to
0000
SOME QUICK FACTS
:
1) Testing the PIN number is working: Press
Panic A
then the
PIN
number –
the
green
LED
should
start flashing
continuously (this indicates that the new PIN
number has been taken in). After the test
Press DISARM twice
to come out
of
the programming mode.
2)
HOME ARM
button not accessible with this system (the same Key Pad is
used
as an accessory with the other upgraded system).
3)
PANIC A + PANIC B
– sets the alarm off (
Panic Alarm
)
4)
Battery Not Inserted Properly
: If the Key Pad is not responding (no
flashing
light when buttons pressed) – make sure that the battery is inserted
properlythere
are two steel strips, make sure that the shorter sits below the battery and the
longer above.
