Yale H48000-960H, Руководство пользователя, Страница: 16 / 36

16
Signal Loss
This function alerts you should any signal loss happen to any camera. This can be caused by cutting the
cameras cable, turning off the power supply to the camera or disconnecting from the DVR.
Firstly you will need to select the camera channel you wish to enable (dropdown menu). Once you have
selected the channel you will need to check the ENABLE box.
Period: Here you can select day and time period you wish the system to look for signal loss detection. The
system will be defaulted to 24 hours a day 7 days a week detection.
RECORD CHANNEL: is a feature which you could set the DVR to record a number of cameras should 1
channel be activated. Should the signal loss detection on Channel 1 be activated you can set the system
to start recording cameras on different channels without it needing to be activated, helping to give you
maximum coverage.
TOUR: is similar to above but this will record and rotate through the channels selected.
The remaining 4 icons are used for notifying you of the activation
SHOW MESSAGE: This will allow a message to pop up on your screen to indicate activation has taken
place
BUZZER: This will activate a buzzer sound on the DVR to indicate activation has taken place
SEND EMAIL: This will instruct the DVR to email you upon activation. Email set up is completed in Settings
-> Yale Cloud -> Email option.
FTP UPLOAD: This will allow you to store footage on a different remote location. Set up is completed in
Settings-> Yale Cloud -> FTP option.