Yale ERC40VH, Руководство пользователя

Страница: 73 / 105

screen, as Figure 24 shows.
The process for viewing and removing the system's operator checklist logs is shown in Table 18 .
Table 18.
Access Impact Events Log Screens
!!
—
Scroll Keys
—
▸
Activity Log
Main menu
↑
Up
Arrow/Down
Arrow Soft
Key
↓
Activity Log
Impact
Events Log
Submenu Press Enter Key (*)
The most recent
Impact Events Log
entry will display Press the Up Arrow or Down
Arrow soft key to scroll through
the log entries
To remove all log entries:
Press Trash Can (
# ) Key to remove
all entries
This log screen is
replaced by the
Empty log screen Press either Scroll
Key (
!!
— or —
▸
)
to exit
When a person with Supervisor password-level access views the log, any recorded events under Service
Technician-level access are shown as
*****
instead of the actual password number. Also, if there was no
password logged in at the time of an event, the password appears as
*****
.
Calibration Menu
INTRODUCTION
The Calibration Menu is a main menu (top-level menu) that is visible at Service Technician, Supervisor, and
Operator password access levels. The
Table 9 topic shows the icons displayed on calibration screens. To
access this menu, cycle through the main menu title screens by pressing the Scroll Back Key ( ?— ) or Scroll
Forward Key ( —? ) until the Calibration Title Screen is displayed, as shown in Figure 29 .