
Specification
2.
Using the Viewer:
When the door bell is pressed
the LCD screen will automatically operate (the length
of time this stays on can be changed in the menu).
To view without the bell being pressed, press the
power button for 2 seconds. Press the power button
again (while screen is on) and you will zoom in, press
the left or right arrow buttons to zoom to the left or
right. Press the power button again and to zoom
back out.
3.
Taking Pictures:
Only possible if a ‘SD card’ is
fitted (not supplied).
If required, each time the door bell is pressed a
picture will be taken (see the setup menu).
To take a picture without the door bell being
pressed, press the power button (if not on) then
press the left arrow button.
4. Playback (View) Pictures:
To view the pictures,
press the power button (if not on) then press the
right arrow button. Use the left and right arrow but-
tons to scroll through the pictures taken. You can
zoom into the photo by pressing power button and
then left/right to navigate.
Note:
If untouched the door viewer will shut down in
10, 20 or 30 seconds depending on setting.
Using the viewer
Doorbell
Pressing
9
Содержание EIS1100
Страница 2: ...Electronic Door Viewer User Manual Keep this manual safe for future reference EIS1100 ...
Страница 12: ......