20
To check after installation
• Check that the thumb turn locks and unlocks properly. If any of these is not
working correctly you have not put the right/left switch and/or the right/left
screw in correct position. This switch and screw is located on the back side
of the inside.
• Check that the door locks from outside with the -button and opens with
correct code/key tag.
• Check that the trigger bolt doesn’t sink in the strike plate.
The gap between door and strike plate should be between 2 and 5,5 mm.
• Check that the handle can move easily and when releasing the handle it
should return to horizontal position easily. If this is not the case, please check
the length of the square pin and if the product is assembled straight on the
door since this can cause malfunction of the product.
• Check that all codes and keytags and remotes (option) works correctly.
• Make sure all users knows about the function and location of the battery
back up and reset button.
9 V Battery back up
Reset button
