Yale Assure Lock 2 Скачать руководство пользователя страница 60

Страница: 60 / 68

Daily Repeating
Schedule Set/Erased

0x60

0x (01-
max

users)

Schedule(s) has been set/erased for specified
user ID

0x06

0xFE

Daily Repeating
Schedule
Enabled/Disabled

0x61

0x (01-
max

users)

Daily Repeating Schedule(s) were
enabled/disabled for User ID specified in Alarm

Level. If Alarm Level = 0xFF then all users were
affected.

0x06

0xFE

Year Day Schedule
Set/Erased

0x62

0x (01-

max
users)

Schedule(s) has been set/erased for specified
user ID

0x06

0xFE

Year Day Schedule

Enabled/Disabled

0x63

0x (01-

max
users)

Year Day Schedule(s) were Enabled/Disabled

for User ID specified in Alarm Level. If Alarm
Level = 0xFF then all users were affected.

0x06

0xFE

All Schedule Types

Erased

0x64

0x (01-

max
users)

All Schedule Types were Set (erased/set) for

User ID specified in Alarm Level. If Alarm Level
= 0xFF then all users were affected.

0x06

0xFE

All Schedule Types
Enabled/Disabled

0x65

0x (01-

max
users)

Schedule(s) has been enable/disabled for

specified user ID. If Alarm Level = 0xFF then all
users were affected.

0x06

0xFE

Master Code changed

0x70

0x00

Master code was changed at keypad or via RF

0x06

0x12

User added

0x (01-
max
users)

User added. Alarm level = user slot number

0x06

0X0E

Duplicate Pin code error

0x71

0x (01-
max

users)

Where Alarm level represents user slot
Number, an Alarm is generated in response to
add user via RF.

This alarm is not generated when attempting to
add duplicate pin at the

Keypad (The lock simply denies it and

plays the “Denied” sound.) Trying to duplicate

the master code will result in a 0x71 0x00

alarm report.

0x06

0x0F

Содержание Assure Lock 2





































































Результаты поиска

Содержание Assure Lock 2

Отзывы:

Бренды по названию

Популярные бренды

Yale Assure Lock 2, Руководство по установке

Результаты поиска

Содержание Assure Lock 2

Отзывы:

Бренды по названию

Популярные бренды