Mounting the camera
The Stand on the AC-101W is
adjustable. There are three adjustable
sections.
1) Rotate the camera by loosening the
hex screw (using the supplied hex key).
Once in position tighten the screw again
to secure in place.
2) Adjust the elbow joint by loosening
the hex screw. Once in position tighten
the screw again to secure in place.
3) Where the neck of the stand attached
to the mounting base, rotate the stand
by loosening the radial joint locking ring.
Once in position tighten the ring again
to secure in place.
To mount, use the supplied screws and
tighten the mounting plate against a flat
surface.
Troubleshooting
Video Loss
Video Loss appears where the camera
image should be displaying on my
Recorder
Check the Extension cable (power &
video) is connected to the camera
Check the video output from the
camera is securely connected to a video
input channel on the DVR
Check the power from the camera is
connected to the power adapter and
connected to a power supply and
switched on
Bright Spots at Night
When I view an image from the camera
at night I can only see a bright spot with
no image
This can be caused by a reflection from
the cameras built in infra-red LED’s
looking through a window. Re-position
the camera to the other side of the
window or to a different location
Can’t connect to my TV
The BNC extension cable will not
connect to my TV
Majority of TV’s do not have a BNC
connection. You will need to purchase
a BNC to RCA adapter (not included).
This will allow the camera to be
connected to a RCA input (Yellow
Socket) on the TV.
Technical Support
Email:
Telephone:
01902 364606
Fax:
0845 223 2127
Write to:
Yale UK, School Street,
Willenhall, West Midlands WV13 3PW
1
2
3