background image

An ASSA ABLOY Group brand

80-8470-0628-000 (11-18)

6

1.    Remove cotter pin.

2.    Remove castle nut.

3.    Remove washer.

4.    Carefully pull up on spring hub to 

disengage spring.

5.    Remove spring and note orientation.

6.    Remove lever handle.

7.    Pick-up flat gear, flip and orient stop on 

opposite side of stop post.  See pictures 
for orientation.

8.    Install spring upside down from original 

orientation and place spring leg on 
opposite side of stop post from original 
installation orientation.  See pictures for 
orientation.

9.    Install lever 180 degrees from original 

position. 

10.  Install spring hub with stamped number 

in the 6 o'clock position.

11.  Rotate spring leg around with needle 

nose pliers to engage notch in spring 
hub, refer to pictures for reference 
position.  Press down on spring hub to 
ensure complete engagement.

12.  Install washer.

13.  Install castle nut, do not over tighten, 

verify by insuring lever returns 
horizontally on its own.

14.  Install cotter pin.

Tools Needed: Needle Nose pliers, Crescent wrench.

To Change Hands: 

Notch for spring to engage for left hand reverse operation

Spring orientation for right hand reverse operation

LEFT HAND REVERSE

Castle Nut

Spring Hub

Flat Gear

Stop Post

Cotter Pin

RIGHT HAND REVERSE

Castle Nut

Spring Hub

Flat Gear

Stop Post

Cotter Pin

Product Support Tel 800.438.1951 • www.yalelocks.com

Yale® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company. Other products' brand names may be trademarks or registered trademarks of their

respective owners and are mentioned for reference purposes only. These materials are protected under U.S. copyright laws. All contents current at time of publication. 

Yale Security Inc. reserves the right to change availability of any item in this catalog, its design, construction, and/or its materials.

Copyright © 2005, 2013, Yale Security Inc., an ASSA ABLOY Group company. 

All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.

Yale Locks & Hardware is a division of Yale Security Inc., an ASSA ABLOY Group company.

Содержание 628F







Отзывы: