Yale HOISTS YJL Series, Руководство по эксплуатации, техническому обслуживанию и каталог запасных частей

Страница: 17 / 36

17
INSPECTOR’S REPORT
ITEM REMARKS (LIST DEFICIENCIES AND RECOMMENDED ACTION)
Inspector’s Date
Signature Inspected Approved by Date
Figure 10B — Recommended Inspector’s Report
NOTE: All bearings except hook and idler sheave bearings are prelubricated and sealed.
(*) This lubrication schedule is based on a hoist operating in normal environment conditions. Hoists operating in adverse
atmospheres containing excessive heat, corrosive fumes or vapors, abrasive dust, etc., should be lubricated more frequently.
Figure 11 — Recommended Lubrication Schedule
RECOMMENDED LUBRICATION SCHEDULE*
YALE ELECTRIC POWERED CHAIN HOIST
PAGE AND COMPONENT TYPE OF LUBRICANT TYPE OF SERVICE AND
REFERENCE NO. FREQUENCY OF LUBRICATION
HEAVY NORMAL INFREQUENT
Pages 32 & 33
Load Chain SAE 90 gear oil Daily Weekly Monthly
Ref. No. 8
Pages 30 & 31 Gearing SAE 90 extreme pressure (EP) gear oil At periodic inspection (see Figure 10A)
Pages 28 & 29 Limit Switch Shaft Multi-purpose oil or
Monthly Yearly Yearly
Ref. Nos. 9 & 7 general purpose spray
Pages 32 & 33
Ref. No. 18, 30
Load Hook Bearing SAE 30 gear oil or motor oil Weekly Monthly Yearly
Pages 32 & 33 Idler Sheave Bearing
Multi-purpose lithium At periodic inspection (see Figure 10A)
Ref. No. 27 (Bushing) Assembly
base bearing grease - NLGI #2
Go To Index