manualshive.com logo in svg

Yale HOISTS YEL Series, Руководство по эксплуатации, техническому обслуживанию и каталог запасных частей, Страница: 2 / 34

Поделиться
Скачать
Yale HOISTS YEL Series Скачать руководство пользователя страница 2

Every hoist is thoroughly inspected and

performance tested prior to shipment from the

factory. If any properly installed, maintained and

operated hoist as outlined in the applicable

accompanying Yale Hoists manual develops a

performance problem due to defective materials or

workmanship as verified by Yale Hoists, repair or

replacement of the hoist will be made to the

original purchaser without charge and the hoist

will be returned, transportation prepaid. This

warranty does not apply where deterioration is

caused by normal wear, abuse, improper or

inadequate power supply, improper or inadequate

maintenance, eccentric or side loading, 

overloading, chemical or abrasive actions,

excessive heat, unauthorized modifications or

repairs, or use of non-Yale repair parts. EXCEPT

AS STATED HEREIN, YALE HOISTS MAKES NO

OTHER WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE.

© 2002 Yale Hoists

®

Printed in USA

WARRANTY

Yale Hoists 

•

414 Broadway Avenue 

•

P.O. Box 769 

•

Muskegon, Michigan USA

Tel:  

866.805.2962 

•

Fax:

800.742.9270

www.yalehoists.net

Содержание YEL Series



































Отзывы:

Нет отзывов