YAKUMO DELTA X GPS 5 BT, Руководство пользователя, Страница: 78 / 97

Network (Ethernet) Card Connection
Use a network (Ethernet) card to connect directly to a network. You do not need
to create a new connection on your Yakumo deltaX 5 BT. Insert a network card
and you can create a connection.
Before creating the connection, you need to:
z
Have a network card (SD IO). (For installation information, see the
documentation supplied with the product.)
z
Obtain the following information from your network administrator: user
name, password and domain name.
Creating a Network Card Connection
1. Insert the network card into your Yakumo deltaX 5 BT.
2. The first time you insert the card, Network Settings appears automatically so
that you can configure the network card. If it does not appear or to change
settings later, tap
Æ
Settings
Æ
Connections
Æ
Network Cards
.
3. If you need to enter specific server information, on the
Network Adapters
tab,
tap the appropriate adapter and then
Name Servers
. Most networks use DHCP,
so you should not have to change these settings unless your network
administrator instructs you to do so.
4. If necessary, connect the network card to the network by using a network
cable.
NOTE: You may need proxy server and VPN connection settings. For more information,
see Yakumo deltaX 5 BT online help and your network administrator.
Starting and Ending a Network Card Connection
To start the connection, install the network card and connect the network cable.
Then, use the desired program. For example, switch to Pocket Internet Explorer
and browse to a Web page. Your Yakumo deltaX 5 BT will automatically
connect.
To end the connection, remove the card from your Yakumo deltaX 5 BT.
70