1032414B-2/15
PUSH BASE ONTO
CARRIER MAST.
ALIGN HOLES IN MAST AND BASE.
Insert second bolt with a
washer into adjacent hole.
Position clear sleeve so
bolt can pass through.
Attach washer and nut.
TIGHTEN with adjustable-end
wrenches or 9/16" wrenches.
Insert pin into
holes in
plates and
through mast.
Secure wire onto
end of hitch pin.
At center hole near end: Insert bolt and washer.
Attach another washer and nut to bolt.
TIGHTEN with
adjustable-end wrenches
or 9/16" wrenches.
The hole in the hitch
must align to the
hole in the carrier.
Insert carrier into hitch.
ATTACH CARRIER
TO TRAILER HITCH.
TIGHTEN bolt.
SECURE hitch bolt
with safety clip.
INSERT hitch bolt and
washer from RIGHT TO LEFT.
If you have
purchased the
QuickHitch,
install it here
and continue at
step 11.
WARNING:
DO NOT OVER-TIGHTEN
THIS BOLT!
