6100014323_9812172_Rev2
3/9
TIGHTEN RUGGEDLINE SPINE HARDWARE
Using the 10 mm Spanner, and avoiding damage to the powder
coat, start to carefully secure the RuggedLine Spine by tightening
the M6 Nylock nut to 7 Nm into the mounting holes in tray.
5
REPEAT STEPS TO OPPOSITE SIDE
Repeat steps 1-6 for securing opposite side of RuggedLine Spine.
Ensure both spines are securely positioned on vehicle tray. Check each screw is
secure before proceeding to install LockNLoad Platform or LockNLoad Bars.
6
FOR PLATFORM INSTALLATION, CONTINUE TO PAGE 4
FOR BAR INSTALLATION, CONTINUE TO PAGE 6
!
Turn Spanner carefully
and be sure not to
damage the Nut.
!