background image

6100003631-Rev0.2

1/2

 

  

FIXED AND TRACK MOUNT KITS

®

LockNLoad Mk2 Leg Kit Instruction

THESE INSTRUCTIONS SUPPLEMENT 

THE BAR/LEG INSTALLATION 

SECTIONS THAT MAY STILL 

FEATURE THE MK1 LEG IN YOUR 

VEHICLE FIXED OR TRACK MOUNT 

FITTING KIT INSTRUCTION

BAR  INSTALLATION

INSERT LEGS

Slide the pre-assembled Leg assemblies into the 
underside channel of LockNLoad Bars.  

If Leg assemblies will not slide in, 
loosen Screws to increase gap.

1

Note: Nut Plates 
are not required.

LEVEL BARS - FIXED POINT

With vehicle on a level surface, adjust all 
Bar angles to be level using a Spirit Level.  

The Bar angle can be adjusted to reduce 
any wind noise. In most cases this is 
achieved by getting the Bar in-line 
with air flow parallel to the ground.

2

Air Flow

SECURE LEGS TO BARS

Tighten all M8 Set 
Screws to 9 Nm using 
a 13 mm Spanner.

3

Отзывы: